Sliding Door Height Adjustment: A Practical Check Sequence
Height adjustment helps place a compatible door correctly within its opening. It is useful for aligning gaps and the panel position, but it cannot correct every problem caused by the track, floor or panel construction.

Begin with the cause of the misalignment and use the selected system’s adjustment procedure.
Check the fixed references first
Confirm the track location, supporting structure and finished floor level. Check whether the opening is plumb and whether the panel itself is straight.
If the track is incorrectly positioned or a fixing has moved, adjusting the hangers may hide one symptom while creating another. Resolve the fixed condition before tuning the moving parts.
Record the current gaps
Measure the head and floor clearances and the panel’s relationship to the closing jamb. Check at more than one point and throughout travel where relevant.
A panel rubbing only at one location suggests a different cause from a uniformly low panel. Recording the positions helps avoid repeated adjustments without a clear result.
Adjust within the permitted range
Use the specified tool and sequence, supporting the panel where required. Establish the intended level and alignment using the approved adjustment points.
Do not loosen retention parts that are not intended for adjustment. After setting the position, secure the relevant locking features as directed by the manufacturer.
Recheck connected components
Changing panel height can affect guide engagement, handle clearance and the soft-close trigger relationship. Changing its angle can alter the closing gap and lock alignment.
Test the whole travel after the adjustment. A panel that looks correct when closed can still rub inside a pocket or miss a trigger at the open end.
Finish with operation, not appearance alone
Check that the panel moves normally, remains guided and reaches both intended end positions. Confirm that any closing or release function still works and that the service points remain accessible.
FMH PE06 lists adjustable door height. Use the exact adjustment drawing and range for the supplied version; the feature description does not provide a universal setting procedure.
Common questions
Can I raise the door until floor rubbing stops?
Only while maintaining the required head clearance, guide engagement and other system conditions. Identify why it was rubbing first.
Is repeated adjustment normal?
If alignment keeps changing, investigate the panel, fixings and supporting structure rather than treating repeated adjustment as the solution.